Minolta/Sony camera accessories

Please note that this page only provides technical information. This is not an online shop. Don't send requests for price quotes etc. I can not sell you anything that's listed here.
Display filter Permalink
Status

Accessories are color-coded as follows:

Announced accessory
Current accessory
Discontinued accessory

Contributors

The following people have contributed to this page:

Bernard Berrebi, Hans-Peter Braun, Jürgen Buss, David Defoort, Patrick Ferru, Vitor Fonseca, Mark A. Henn, Matthias Paul, Mathias Schwenke, Viggo Sloth

Thanks to all!

Last update: November 21st, 2024

Releases

Image: Sony, used by permission
Sony GP-VPT2BT
Bluetooth remote control/grip/tripod. ¼″ threads, tilt and swivel. Requires Bluetooth-capable camera and possibly firmware update.
Image: Sony, used by permission
Sony GP-VPT1
Wired remote control/grip/tripod (for Multi Terminal). ¼″ threads and quick release. Comes with lanyard and pouch.
Sony VMC-MM1
Multi Terminal remote release cable, to be used with Sony FA-WRR1. Length 80 cm.
Image: Sony, used by permission
Sony RM-VPR1
Wired remote controller for cameras with Multi Terminal interface or Minolta/Sony 3-pin remote release socket. Comes with adapter cables for both interfaces and a holder with clip. See camera table for compatibility.
Image: Sony, used by permission
Sony RM-SPR1
Wired remote controller for cameras with Multi Terminal interface. Cable length 80 cm. See camera table for compatibility.
Image: Sony, used by permission
Minolta RC-1000L, Sony RM-L1AM
Wired camera release, 5 m cable length. See camera table for compatibility.
Image: Sony, used by permission
Minolta RC-1000S, Sony RM-S1AM
Wired camera release, 50 cm cable length. See camera table for compatibility.
Sony RMT-P1BT
Bluetooth remote control. Requires Bluetooth-capable camera and possibly firmware update.
Image: Sony, used by permission
Sony RMT-VP1K
IR remote release kit. Receiver connects to Multi Terminal, can be mounted on Multi Interface shoe or on tripod (¼″ threads). Three channels. Includes receiver, sender RMT-VP1 and clip.
Image: Sony, used by permission
Sony RMT-DSLR2
IR remote controller for Sony cameras. Adds video recording button. See camera table for compatibility.
Image: Sony, used by permission
Sony RMT-DSLR1
IR remote controller for Sony cameras. See camera table for compatibility.
Image: Minolta, used by permission
Minolta RC-3
Wireless camera release. See camera table for compatibility.
Image: Minolta, used by permission
Minolta IR-1N
Wireless camera release. IR-1N has ISO flash shoe, requires FS-1100 adapter to mount on iISO cameras. Three channels, 60 m range. See camera table for compatibility.

Caps

Image: Sony, used by permission
Sony ALC-B55
Body cap for A-mount cameras, embossed Sony logo, sometimes with Alpha logo sticker.
Image: © Michael Hohner
Konica Minolta BDC-1000
Body cap for A-mount cameras, black.
Image: © Michael Hohner
Minolta BC-1100
Body cap for A-mount cameras, white.
Image: © Michael Hohner
Minolta BC-1000
Body cap for A-mount cameras, black.
Image: Sony, used by permission
Sony ALC-R55
Rear lens cap for A-mount lenses, embossed Sony logo.
Image: © Michael Hohner
Konica Minolta LR-?
Rear lens cap for A-mount lenses, white.
Image: © Michael Hohner
Minolta LR-?
Rear lens cap for A-mount lenses, white.
Image: © Michael Hohner
Minolta LR-1000
Rear lens cap for A-mount lenses.
Image: Sony, used by permission
Sony ALC-B1EM
Body cap for E-mount cameras.
Image: Sony, used by permission
Sony ALC-R1EM
Rear lens cap for E-mount lenses.
Image: Sony, used by permission
Sony ALC-FxxZ
Front lens cap, xx=size, Alpha and Zeiss logo.

Sizes: 62 mm, 72 mm, 77 mm

Image: Sony, used by permission
Sony ALC-FxxG
Front lens cap, xx=size, “G” and Alpha print.

Sizes: 55 mm, 62 mm, 77 mm

Image: Sony, used by permission
Sony ALC-FxxS
Front lens cap, xx=size, Sony print.

Sizes: 40.5 mm, 49 mm, 55 mm, 62 mm, 67 mm, 72 mm, 77 mm

Image: Sony, used by permission
Sony ALC-FxxAT
Front lens cap, xx=size, Alpha logo, 2 sets, set (W) with white and pink cap, set (S) with silver and gold cap.

Sizes: 49 mm

Image: Sony, used by permission
Sony ALC-FxxA
Front lens cap, xx=size, large Alpha print.

Sizes: 49 mm, 55 mm, 62 mm, 67 mm, 72 mm, 77 mm

Image: Sony, used by permission
Sony ALC-Fxx
Front lens cap, xx=size, embossed Sony logo.
Image: © Michael Hohner
Konica Minolta LF-13xx
Front lens cap, xx=size, Konica Minolta logo.
Minolta LF-12xx
Front lens cap, xx=size, newest style.
Image: © Michael Hohner
Minolta LF-11xx
Front lens cap, xx=size, new style.
Image: © Michael Hohner
Minolta LF-10xx
Front lens cap, xx=size, old style.
Image: Sony, used by permission
Sony FA-SHC1M
Accessory shoe cap for Multi Interface shoe. See camera table for compatibility.
Image: Sony, used by permission
Minolta SC-1000/3/5/7/8/9/7xi/9xi, Sony FA-SHC1AM/B, FA-SHC1AM/S
Accessory shoe cap for iISO shoe. See camera table for compatibility.

Viewfinder accessories

Image: Minolta, used by permission
Minolta Eyepiece Corrector 1000, Sony FDA-ECxxx
Eyepiece corrector

Minolta name, order no.Sony nameDioptersMinolta name, order no.Sony nameDiopters
No. 1, 8230-500FDA-ECF05+0.5No. 6, 8230-400FDA-ECN10−1.0
No. 2, 8230-600FDA-ECF10+1.0No. 7, 8230-300FDA-ECN20−2.0
No. 3, 8230-700FDA-ECF15+1.5No. 8, 8230-200FDA-ECN30−3.0
No. 4, 8230-800FDA-ECF20+2.0No. 9, 8230-100FDA-ECN40−4.0
No. 5, 8230-900FDA-ECF30+3.08215-099empty frame
Image: Minolta, used by permission
Minolta Angle Finder Vn, Sony FDA-A1AM
Angle finder, rotating, with diopter adjustment and switchable 2×/1× magnification.
Image: Sony, used by permission
Sony FDA-ME1AM
Viewfinder magnifier, 1.15× magnification.
Image: Minolta, used by permission
Minolta Magnifier Vn, Sony FDA-M1AM
Viewfinder magnifier, with diopter adjustment, 2.3× magnification.
Image: Sony, used by permission
Sony FDA-EV1S
Electronic viewfinder for NEX-5N. 1024×768 pixels resolution. Includes FDA-EP10 eyepiece cup.
Image: Sony, used by permission
Sony FDA-SV1
Optical viewfinder for NEX cameras. Covers angle of view of E 16/2.8. See camera table for compatibility.
Image: Sony, used by permission
Minolta Eyepiece Cup EC-1000/1100/1200/1300/1400/1500/3/5/5xi/7/7xi/9, Sony FDA-EP1AM, FDA-EP2AM, FDA-EP3AM, FDA-EP4AM, FDA-EP5AM, FDA-EP6AM, FDA-EP7AM, FDA-EP8AM, FDA-EP10, FDA-EP11, FDA-EP12 .. FDA-EP19
Rubber eyepiece cup. See camera table for compatibility.
Minolta/Sony Focusing screens
The following screens exist (* = user-changeable)

CameraScreen

G type,
spherical acute matte

M type,
super-spherical acute matte

L type,
spherical acute matte with grid

ML type,
super-spherical acute matte with grid

S type,
matte with scales

PM type,
matte with split-prism

C type,
clear
α900*, α850*+FDA-FM1AMFDA-FL1AM    
α700+++    
7D2181-5805-01 + 2181-5820-022181-5851-71 + 2181-5820-022181-5805-01 + 2181-5852-712181-5851-71 + 2181-5852-71   
9*, 9Ti*8236-1008236-4008236-3008236-6008236-200  
9xi+ + +  
9000AF*8231-110 8231-120 8231-1308231-3108231-170
700si, 800si+ + +  
8000i*, 7000i*8234-210 8234-220 8234-230  
7 (all variants)2162-5805-018240-4805-018240-3805-018240-5805-018240-2805-01  
7000AF*8231-210 8231-220 8231-2308231-310 
600si2097-5805-01 2097-5819-01 2097-5820-01  

For all other cameras, only a fixed G type screen exists.

Image: Sony, used by permission
Sony CLM-FHD5
5″ video monitor, 1920×1080 pixels, HDMI input (cable included), tilt/swivel, 3.5 mm headphone socket, speaker, detachable sunshade, ISO mount. Can use W/M/V-series battery or AC-PW10AM power supply (optional).
Image: Sony, used by permission
Video monitor Sony CLM-V55
5″ video monitor, 800×480 pixels, HDMI input (cable included), tilt/swivel, 3.5 mm headphone socket, speaker, detachable sunshade, exchangeable iISO (Minolta/Sony Alpha) and ISO connectors. Can use NP-FM500H battery or AC-PW10AM power supply (optional).

Display accessories

Image: Sony, used by permission
Display protectors Sony PCK-LM1AM, PCK-LM2AM, PCK-LM3AM, PCK-LM1EA, PCK-LM10, PCK-LM11, PCK-LM13, PCK-LM14, PCK-LM15, PCK-LM16, PCK-LM17, PCK-LG1, PCK-LG2, PCK-LG3
Soft display protector, sticks on camera display. See camera table for compatibility.
Image: Sony, used by permission
Display protectors Minolta NDS-1, Sony PCK-LS1AM, PCK-LS2AM, PCK-LS3AM, PCK-LS4AM, PCK-LS5AM, PCK-LS7AM, PCK-LS8AM, PCK-LS9AM, PCK-LS1EM
Soft display protector, sticks on camera display. See camera table for compatibility.
Image: Sony, used by permission
Display protectors Sony PCK-LH1AM, PCK-LH2AM, PCK-LH3AM, PCK-LH4AM, PCK-LH5AM, PCK-LH6AM, PCK-LH7AM, PCK-LH1EM
Hard display protector, clips onto camera display. See camera table for compatibility.
Image: Sony, used by permission
Sun shade Sony SH-L1AM, Sony SH-L2AM
Sun shade, clips onto camera display. See camera table for compatibility.

Filters and lenses

Image: Minolta, used by permission
Minolta/Konica Minolta/Sony Close-up lens
Minolta:

Name, Diopters49 mm55 mm72 mm
Close-up lens for MD 100-500mm, +0.37  ?
No. 0, +0.946711-1106031-530 
No. 1, +2.06711-1206021-540 
No. 2, +3.86711-1306021-550 

Konica Minolta:

Diopters49 mm
+5.0CL49-200

Sony:

Diopters58 mm67 mm
~ +3.0VCL-M3358VCL-M3367
Minolta Portrayer Set
Portrayer filter sets

Set55 mm72 mm76 mm (square)77 mm
P (3 filters)7255-1817272-1817203-1817277-181
S (2 filters)7255-1827272-182??
Sony VF-DCPL1 Circular Polarizer Drop-in Filter
40.5 mm drop-in filter for compatible lenses, with holder. See lens table for compatibility.
Image: © Michael Hohner
Minolta Circular Polarizer Drop-in Filter, Sony Circular Polarizer Drop-in Filter
42 mm drop-in filter for compatible APO lenses, with holder. See lens table for compatibility. Minolta Order No. 6807-100. Sony replacement part number A-1199-756-A.
Drop-in Filters for 500/8 Reflex lens
Drop-in Filters for 500/8 Reflex lens, clear (top) and ND 4× (bottom). Filters are fixed in holders. They can be installed in other lenses with rear filters, but you may encounter strong vignetting due to the smaller diameter of the actual filters.
Image: Sony, used by permission
Sony Filters
Filters with Carl Zeiss T* coating, Aluminium threads, slim design.

Type 40.5 mm 49 mm 55 mm 62 mm 67 mm 72 mm 77 mm 82 mm
Clear VF-405MP VF-49MPAM VF-55MPAM VF-62MPAM VF-67MPAM VF-72MPAM VF-77MPAM
ND 8× VF-49NDAM VF-55NDAM VF-62NDAM VF-67NDAM VF-72NDAM VF-77NDAM
Circular polarizer VF-49CPAM, VF-49CPAM2 VF-55CPAM, VF-55CPAM2 VF-62CPAM, VF-62CPAM2 VF-67CPAM, VF-67CPAM2 VF-72CPAM, VF-72CPAM2 VF-77CPAM, VF-77CPAM2 VF-82CPAM2

Simpler, multi-coated filters:

Type 55 mm
Clear VF-K55MP
Image: © Michael Hohner
Minolta Filters
Filters, simple or AC coating

Type Coating 39 mm,
for RF250/5.6, RF500/8, RF800/8
40.5 mm 42 mm,
for APO tele
46 mm 49 mm 55 mm 62 mm 67 mm 72 mm 77 mm 82 mm 95 mm
NORMAL (clear) simple 6702-135                      
AC     6715-109           7072-102   7075-102 7076-102
L-35 (UV) AC       7046-203 7049-303              
L-37 (UV) AC   ?     7049-301 7055-301 7062-301   7072-201 7077-201    
L-39 (UV) simple   ?   ?   ?            
1A simple           ?   ?        
1B (Skylight) simple   ?   ?                
AC   ? 6715-117 7246-317 7249-317 7255-317 7262-317     7277-317    
85/A12 (Orange brown) simple ?         ?            
AC   7241-315 6715-115   7249-315 7255-315 7262-315   7272-115      
80 B/B12 (Blue) simple ?     ?   ?            
AC   7241-305 6715-105 7246-105 7249-305 7255-305 7262-305   7272-105      
ND 4× (Grey) simple 6702-136     ?   ?            
AC   7241-302 6715-102 7246-302 7249-302 7255-302 7262-302   7272-102      
ND 8× (Grey) simple 6702-137                      
Y 52 (Yellow) simple 6702-112 ?   ?   ?            
AC   7241-301 6715-101   7149-301 7155-301 7162-301   7172-201      
GO (Green?) simple           ?            
AC         ? ?            
O 56 (Orange) simple 6702-133         ?            
AC   7241-312 6715-112   7249-312 7255-312 7262-312   7272-112      
R 60 (Red) simple 6702-134         ?            
AC   7241-313 6715-113   7249-313 7255-313 7262-313   7272-113      
Circular polarizer simple         ? ?     ?      
AC     6807-100
(see above)
  7249-311 7255-311 7262-311   7272-311 7277-210    
Circular polarizer Ⅱ AC           7255-318 7262-318   7272-318      

Creative Expansion Cards

These expansion cards add functionality to a number of film cameras (see camera table, “cards” is mentioned in some columns). None of these cards is required for a camera, and none of these cards will store images. Image recording and storage is still on film!

Travel
Child
Sports action 2
Gives priority to short exposure times.
Sports action
Gives priority to short exposure times.
Portrait
Automatic Depth Control
Closeup
Maximizes DOF for closeup shots.
Panning
Chooses a longer exposure time than normal to blur the background with panning shots.
Intervalometer
Allows automated exposure at intervals between 1 second and 24 hours.
Background Priority
Automatically chooses aperture so that background stays within depth of field when distance and focal length changes.
Multiple Exposures 2
Adds multiple exposure function.
Multiple Exposures
Adds multiple exposure function. Up to 9 exposures can be made for a single frame, with normal, increasing or decreasing exposure.
Exposure Bracketing 2
Adds exposure bracketing function. Series of 3, 5 or 7 shots can be taken with exposure steps of 1/3, 1/2 or 1/1 stops. Flash bracketing with exposure steps of 1/2 or 1/1 stops.
Exposure Bracketing
Adds exposure bracketing function.
Flash Bracketing
Adds flash exposure bracketing function.
Data Memory 2
Stores the following exposure data for 4 rolls of up to 40 frames: exposure mode, shutter speed, aperture, lens focal length, maximum aperture of lens, exposure compensation, film speed. Note that this card does not store images!
Data Memory
Stores exposure data. Note that this card does not store images!
Fantasy 2
Exposes a frame with varying focus during exposure or with multiple exposures to achieve a dreamy look.
Fantasy Effect
Exposes a frame with varying focus during exposure or with multiple exposures to achieve a dreamy look.
Auto Shift 2
Takes 3 pictures in a row with identical exposure but varying aperture/time combinations. Aperture/time can be changed by 1, 2 or 3 stops.
Automatic Shift Control
Takes 3 pictures in a row with identical exposure but varying aperture/time combinations.
Multi Spot Memory
Stores up to 8 spot metering values and averages them for final exposure.
Highlight/Shadow Control
Allows to emphasize highlights or shadows during exposure. Highlight exposures are made with +2.3 stops of metered value, shadow exposures are made with −2.7 stops.
A/S mode
Adds A and S exposure modes to cameras that don't have these modes.
Customized Function xi
Allows to customize the following functions:
  • Standard settings after reset: P/A/S/M mode, exposure compensation, metering mode, AF area
  • Increasing or decreasing frame numbers
  • Automatic or manual film rewind
  • Leader out (on/off)
  • DX memory (on/off)
  • Automatic flash in P mode (on/off)
  • Lens button function: focus hold, spot AF, AF-C
  • Automatic grip sensor activation (on/off)
Changed settings remain active when card is removed.
Customized Function

Vertical grips and battery packs

Image: Sony, used by permission
Sony VG-C5
Vertical grip for ILCE-1M2 and ILCE-9M3. Uses one or two NP-FZ100 batteries. Batteries can be charged via USB of the camera.
Sony VG-C4EM
Vertical grip for ILCE-1, ILCE-9M2, ILCE-7RM4, ILCE-7RM4A and ILCE-7RM5. Uses one or two NP-FZ100 batteries. Batteries can be charged via USB of the camera.
Sony VG-C3EM
Vertical grip for ILCE-9, ILCE-7RⅢ, ILCE-7RⅢA and ILCE-7Ⅲ. Uses one or two NP-FZ100 batteries. Batteries can be charged via USB of the camera.
Image: Sony, used by permission
Sony VG-C2EM
Vertical grip for ILCE-7Ⅱ, ILCE-7RⅡ and ILCE-7SⅡ. Uses one or two NP-FW50 batteries.
Image: Sony, used by permission
Sony VG-C1EM
Vertical grip for ILCE-7, ILCE-7R and ILCE-7S. Uses one or two NP-FW50 batteries.
Image: Sony, used by permission
Sony VG-C99AM
Vertical grip for α99. Uses one or two NP-FM500H batteries.
Image: Sony, used by permission
Sony VG-C90AM
Vertical grip for α900 and α850. Uses one or two NP-FM500H batteries.
Image: Sony, used by permission
Sony VG-C77AM
Vertical grip for α77, α77Ⅱ and α99Ⅱ. Uses one or two NP-FM500H batteries.
Image: Sony, used by permission
Sony VG-C70AM
Vertical grip for α700. Uses one or two NP-FM500H batteries.
Image: Minolta, used by permission
Minolta VC-700
Vertical grip for Dynax/Maxxum 800si/700si/Alpha 807si/707si. Uses either one 2CR5 or four AA batteries.
Image: Sony, used by permission
Sony VG-B50AM
Vertical grip for α580, α560, α550, α500 and α450. Uses one or two NP-FM500H batteries.
Image: Sony, used by permission
Sony VG-B30AM
Vertical grip for α350, α300 and α200. Uses one or two NP-FM500H batteries.
Image: © Michael Hohner
Minolta VC-7D
Vertical grip for Dynax/Maxxum/Alpha 7D. Uses one or two NP-400 or six AA batteries.
Image: Minolta, used by permission
Minolta VC-600/VC-507
Vertical grip for Dynax/Maxxum 600si/Alpha 507si. Uses either one 2CR5 or four AA batteries.
Image: Minolta, used by permission
Minolta VC-9M
Vertical grip for Dynax/Maxxum/Alpha 9/9Ti (Magnesium alloy). Uses either one 2CR5, four AA or two CR123A batteries. Comes with HS-1.
Image: Minolta, used by permission
Minolta VC-9
Vertical grip for Dynax/Maxxum/Alpha 9/9Ti. Uses either one 2CR5, four AA or two CR123A batteries. Comes with HS-1.
Image: Minolta, used by permission
Minolta VC-7
Vertical grip for Dynax/Maxxum/Alpha 7. Uses either four AA or two CR123A batteries.
Image: Minolta, used by permission
Minolta BP-200
Battery pack for Dynax/Maxxum 5/4/3/3L/Alpha Sweet Ⅱ/Sweet Ⅱ L. Uses four AA batteries. Includes hand strap.
Image: Minolta, used by permission
Minolta BP-100
Battery pack for Dynax 505si/505si Super/404si/303si/Maxxum HTsi/HTsi plus/STsi/QTsi/Alpha Sweet/Sweet S/360si. Uses four AA batteries. Includes hand strap.
Sony NPA-MQZ1K
Battery pack
  • Holds up to 4× NP-FZ100 batteries
  • Supplies camera with W series or Z series batteries
  • 6× ¼″ mounting threads
  • Micro USB for charging
  • Power supply for fast charging
  • Power output via 2× USB-A ports
Minolta MD-90
Motor drive for Minolta 9000.
Minolta BP-90M
Battery pack for Minolta 9000 with winder MD-90. Uses twelve AA batteries.
Minolta NP-90M/NC-90M
Battery pack for Minolta 9000 with winder MD-90. Uses integrated NiCd battery. Charger NC-90M.
Image: © Hans-Peter Braun, used by permission
Minolta EP-70
External battery pack for Minolta 7000/5000. Uses four AA batteries. Order no. 8775-300.
Minolta BH-70T
Battery holder for Minolta 7000. Uses one 2CR5 Li battery. Order no. 8775-410.
Minolta BH-70L
Battery holder for Minolta 7000/5000. Uses four AA batteries. Order no. 8775-200.
Minolta BH-70S
Battery holder for Minolta 7000/5000. Uses four AAA batteries. Standard battery holder for the 7000/5000. Order no. 8775-???.
Minolta BP-9xi
Battery pack for Dynax/Maxxum/Alpha 9xi. Uses four AA batteries.
Image: Sony, used by permission
Sony STP-HS1AM
Hand straps. Attaches either to vertical grips or to (included) bottom plate. Bottom plate has tripod threads. Colors black, white or copper.
Image: Sony, used by permission
Sony STP-GB1AM
Hand strap. Attaches either to vertical grips or to (included) bottom plate. Bottom plate has tripod threads.
Image: Minolta, used by permission
Minolta HS-1, HS-700, HS-9xi, HS-7xi
Hand strap for vertical grips.

StrapCameras
HS-1VC-9/VC-9M/VC-7/VC-7D
HS-700VC-700/VC-600/VC-507/RD-175
HS-9xiDynax/Maxxum/Alpha 9xi
HS-7xiDynax/Maxxum/Alpha 7xi
Minolta HS-7
Hand strap for Dynax/Maxxum/Alpha 7000i/8000i with bottom plates AB-700/AB-800.
Image: Sony, used by permission
Sony GP-X2
Grip extender for several ILCE cameras (no batteries, no controls).
Sony GP-X1EM
Grip extender for several ILCA/ILCE cameras (no batteries, no controls).

Batteries, chargers, power supplies

Sony NP-FZ100
LiIon battery for Sony cameras. See camera table for compatibility.
Image: Sony, used by permission
Sony NP-FM500H
LiIon battery for Sony cameras. See camera table for compatibility.
Image: © Bernard Berrebi, used by permission
Minolta NP-400
LiIon battery for 7D and 5D.
Image: Sony, used by permission
Sony NP-FV100
LiIon battery for many NEX video cameras. See camera table for compatibility.
Image: Sony, used by permission
Sony NP-FV70
LiIon battery for many NEX video cameras. See camera table for compatibility.
Image: Sony, used by permission
Sony NP-FM55H
LiIon battery for α100.
Image: Sony, used by permission
Sony NP-FW50
LiIon battery for α55, α33 and many NEX or ILCE cameras. See camera table for compatibility.
Image: Sony, used by permission
Sony NP-FH50
LiIon battery for Sony cameras. See camera table for compatibility.
Image: Sony, used by permission
Sony BC-ZD1
Dual-Battery charger for NP-FZ100 batteries. Input USB-C (Power Delivery, 30 W). Power supply and cable not included.
Sony BC-QZ1
Charger for Z series batteries. Input 100–240V 50/60 Hz AC.
Image: Sony, used by permission
Sony AC-SQ950D
Twin battery charger. Charges two NP-FM500H or NP-FM55H in a row. Input 120V 60 Hz AC or 12V DC.
Image: Sony, used by permission
Sony BC-TRM
Travel battery charger for NP-FM500H. Input 100–240V 50/60 Hz AC, retracting plug.
Image: Sony, used by permission
Sony BC-VM10/BC-VM10A
Charger for NP-FM55H or NP-FM500H. Input 100–240V 50/60 Hz AC.
Image: Sony, used by permission
Sony AC-VQ900AM
Twin battery charger and power supply. Charges two NP-FM500H or NP-FM55H in a row, or supplies power to cameras. Input 100–240V 50/60 Hz AC, Output 7.6V DC. See camera table for compatibility.
Image: © Hans-Peter Braun, used by permission
Minolta BC-400
Charger for NP-400. Input 100–240V 50/60 Hz AC.
Image: Sony, used by permission
Sony BC-QM1
Travel charger for InfoLithium batteries, including NP-FW50, NP-FH50, NP-FV70, NP-FV100, NP-FM55H and NP-FM500H. Also serves as USB power supply and charger. Input 100–240V 50/60 Hz AC.
Image: Sony, used by permission
Sony BC-TRV
Travel battery charger for NP-FV70/NP-FV100. Input 100–240V 50/60 Hz AC.
Image: Sony, used by permission
Sony AC-VQV10
Charges two NP-FV70 or NP-FV100 in a row. Input 100–240V 50/60 Hz AC, Output 7.6V DC.
Image: Sony, used by permission
Sony AC-VQH10
Charges two NP-FH50 in a row. Input 100–240V 50/60 Hz AC.
Image: Sony, used by permission
Sony BC-TRW
Travel battery charger for NP-FW50. Input 100–240V 50/60 Hz AC, retracting plug. Additional USB socket for USB charging. Micro-USB cable included.
Image: Sony, used by permission
Sony BC-VW1
Charger for NP-FW50. Input 100–240V 50/60 Hz AC.
Image: Sony, used by permission
Sony BC-VH1
Charger for NP-FH50, NP-FV70 and NP-FV100. Input 100–240V 50/60 Hz AC.
Image: Sony, used by permission
Sony DC-C1
USB power adapter for cameras using NP-FZ100 or NP-FW50 batteries. Requires USB-C power supply (> 65 W) and USB-C cable (5 A) (not included).
Image: Sony, used by permission
Sony AC-UUD12
USB power supply and charger. Input 100–240V 50/60 Hz AC, Output 5V DC/1500mA. Can only be used with cameras supporting USB charging.
Image: Sony, used by permission
Sony AC-UD10
USB power supply and charger. Input 100–240V 50/60 Hz AC, Output 5V DC/1500mA. Can only be used with cameras supporting USB charging.
Image: Sony, used by permission
Sony AC-UB10/AC-UB10B
USB power supply and charger. Input 100–240V 50/60 Hz AC, Output 5V DC/500mA. Can only be used with cameras supporting USB charging.
Image: Sony, used by permission
Sony AC-PW20
Power supply for Sony cameras. Input 100–240V 50/60 Hz AC, Output 7.6V DC. See camera table for compatibility.
Image: Sony, used by permission
Sony AC-PW10AM
Power supply for Sony cameras. Input 100–240V 50/60 Hz AC, Output 7.6V DC. See camera table for compatibility.
Minolta AC-11
Power supply for 7D and 5D.

Microphones, speakers

Image: Sony, used by permission
Sony ECM-M1
Shotgun Microphone with Multi Interface shoe. 8 audio recording modes, 4 microphone capsules, 2 filters, level control. Supports digital and analog output. With windscreen, connector cap and pouch.
Image: Sony, used by permission
Sony ECM-G1
Shotgun Microphone with Multi Interface shoe. 3.5 mm output socket to connect to non-MI devices. With windscreen, connector cap, 3.5 mm cable and pouch.
Image: Sony, used by permission
Sony ECM-B10
Shotgun Microphone with Multi Interface shoe, adjustable characteristic, filter and level. Supports digital and analog output. With windscreen, connector cap and pouch.
Sony ECM-B1M
Shotgun Microphone with Multi Interface shoe, adjustable characteristic, filter and level. Supports digital and analog output. With windscreen, connector cap and pouch.
Image: Sony, used by permission
Sony ECM-GZ1M
External monaural microphone with Multi Interface shoe. Switchable between zoom mode and gun mode. With windscreen and pouch.
Image: Sony, used by permission
Sony ECM-XYST1M
External stereo microphone for cameras with Multi Interface shoe. 0° to 120°. Set includes microphone, windscreen, 3.5 mm connecting cable and pouch.
Image: Sony, used by permission
Sony ECM-SST1
External stereo microphone with Smart Accessory Terminal interface for some NEX cameras. 90° and 120° switchable. With windscreen.
Image: Sony, used by permission
Sony ECM-CG60
External monaural microphone for cameras with Multi Interface shoe. 3.5 mm plug. Uses one AA battery. Optional high-pass filter. With windscreen and holder.
Image: Sony, used by permission
Sony ECM-CG50
External monaural microphone for cameras with ISO or iISO shoe (via adapter). 3.5 mm plug. Uses one AA battery. Optional high-pass filter. With windscreen and holder.
Image: Sony, used by permission
Sony ECM-ALST1
External stereo microphone for cameras with iISO shoe. 3.5 mm plug. 90° and 120° switchable. With windscreen and pouch. Uses 1× LR44 battery.
Image: Sony, used by permission
Sony XLR-H1
XLR adaptor kit with handle and Multi Interface shoe. Two XLR inputs, one 3.5 mm stereo input, mixer, level control, phantom powering. Supports digital and analog output.

Fits on ILME-FX3 and ILME-FX30.

Sony XLR-K3M
XLR adaptor kit with Multi Interface shoe. Two XLR inputs, one 3.5 mm stereo input, mixer, level control, phantom powering. Supports digital and analog output.

Set includes control box, microphone ECM-XM1, extension cable, windscreen, pouch.

Sony XLR-K2M
XLR adaptor kit with Multi Interface shoe. Two XLR inputs, mixer, level control, phantom powering.

Set includes control box, microphone ECM-XM1, windscreen, pouch.

Image: Sony, used by permission
Sony XLR-K1M
External stereo microphone for cameras with Multi Interface shoe. Two XLR inputs, level control, phantom powering, ISO cold shoe on top.

Set includes control box, microphone, windscreen and pouch.

Image: Sony, used by permission
Sony ECM-S1
Bluetoot microphone with three characteristics and noise filter. Desktop stand (with ¼″ threads), USB-C output, level dial. Receiver with Multi Interface shoe and USB-C and 3.5 mm output.
Image: Sony, used by permission
Sony ECM-W3/ECM-W3S
Dual channel (ECM-W3) or single channel (ECM-W3S) receivers, Bluetooth. Receiver with Multi Interface shoe, shoe protector/stand and 3.5 mm and USB-C outputs. Senders with wind screens and 3.5 mm input.
Image: Sony, used by permission
Sony ECM-W2BT
External wireless Bluetooth microphone. 3.5 mm audio output and built-in microphone on receiver part, 3.5 mm microphone jacks and built-in microphone on sender part. Multi Interface shoe (digital capable) on receiver. With 3.5 mm cable, windscreen, pouch, USB cable, shoe protector.
Image: Sony, used by permission
Sony ECM-W1M
External wireless Bluetooth microphone with two-way communication. 3.5 mm earphone jacks on sender and receiver part, 3.5 mm microphone jacks on sender part. Multi Interface shoe on receiver. With monitoring earphones, strap, pouch.
Image: Sony, used by permission
Sony ECM-AW3
External wireless Bluetooth microphone. 3.5 mm jack on receiver part. With monitoring headphones.
Image: Sony, used by permission
Sony RDP-CA3M
External speaker for cameras with Multi Interface shoe. 2.5 W output. Powered via hotshoe.

Lens adapters

Image: Sony, used by permission
Sony LA-EA5
Adapter for A-mount lenses to E-mount cameras. Suitable for full-frame lenses. Supports fast AF with all SSM/SAM A-mount lenses, using the camera's phase detect AF sensors. Incompatible with the 3×–1× Macro Zoom and with APO TCs.

Supported cameras with SSM/SAM lenses:

  • all E-mount cameras

Supported cameras with classic lenses:

  • ILCE-7RM4 (firmware 1.20 or later)
  • ILCE-6600 (firmware 1.10 or later)
Image: Sony, used by permission
Sony LA-EA4
Adapter for A-mount lenses to E-mount cameras. Suitable for full-frame lenses. Includes ¼″ tripod threads. Supports fast phase-detection AF with all A-mount lenses (except xi lenses). 12 line sensors, 3 cross sensors. Incompatible with the 3×–1× Macro Zoom and with APO TCs. See camera table for compatibility. First generation NEX cameras require firmware update to support this adapter. Includes carrying case.
Image: Sony, used by permission
Sony LA-EA3
Adapter for A-mount lenses to E-mount cameras. Not compatible with xi lenses and with APO TCs. Suitable for full-frame lenses. Includes ¼″ tripod threads. No AF with classic (non-SSM, non-SAM) A-mount lenses.

Latest firmware: 02 (05/2017)

Image: Sony, used by permission
Sony LA-EA2
Adapter for A-mount lenses to E-mount cameras. Includes ¼″ tripod threads. Supports fast phase-detection AF with all A-mount lenses (except xi lenses). 12 line sensors, 3 cross sensors. Incompatible with the 3×–1× Macro Zoom and with APO TCs. See camera table for compatibility. First generation NEX cameras require firmware update to support this adapter.
Image: Sony, used by permission
Sony LA-EA1
Adapter for A-mount lenses to E-mount cameras. Not compatible with xi lenses and with APO TCs. Includes detachable ¼″ tripod mount. Supports AF with SSM and SAM lenses with firmware version 03 (or later) of NEX cameras. No AF with classic (non-SSM, non-SAM) A-mount lenses. APS-C format only.

Camera backs

Image: Minolta, used by permission
Minolta Data Memory DM-9
Data Memory back for Minolta Dynax/Maxxum 9 and Minolta Dynax/Maxxum 9Ti. Stores exposure data onto a 2 MB Smart Media card. Also allows data to be imprinted between frames.

Does not store images.

Image: © Michael Hohner
Minolta Data Saver DS-100
Saves exposure data stored in camera to a Smart Media card. Attaches to lens mount of camera. Only works with the Minolta Dynax/Maxxum 7.

Includes data saver, lens cap, 4 MB Smart Media card and pouch.

Does not store images.

Image: Minolta, used by permission
Minolta Data Back
Replacement camera back. Can imprint date and time onto frames.

Some cameras come as a special QD version which has this functionality integrated. These are not listed here. See camera table for details.

Data backCamera
QD-9Minolta Dynax/Maxxum 9, Minolta Dynax/Maxxum 9Ti
QD-9xiMinolta Dynax/Maxxum 9xi
DB-7Minolta Dynax/Maxxum 8000i, Minolta Dynax/Maxxum 7000i
QD-7Minolta Dynax/Maxxum 7xi
DB-70Minolta 7000AF, Minolta 5000AF
DB-5Minolta Dynax/Maxxum 5xi, Minolta Dynax/Maxxum 5000i
DB-3Minolta Dynax/Maxxum 3000i
Image: © Hans-Peter Braun, used by permission
Minolta Program Back
Replacement camera back. Provides additional functions like intervalometer, bracketing, data imprinting.
Program backCamera
PB-90, PBS-90Minolta 9000AF
PB-7Minolta Dynax/Maxxum 8000i, Minolta Dynax/Maxxum 7000i
PB-70, PBS-70Minolta 7000AF, Minolta 5000AF
Image: Minolta, used by permission
Minolta EB-90
Replacement camera back for Minolta 9000AF.
  • Holds 100 frame film cartridges.
  • Requires motor drive MD-90.
  • Viewfinder extender, with diopter adjustment −3 – +1 dpt.
  • Includes extended functions of PBS-90

Others

Image: Minolta, used by permission
Minolta Slide Copy Stand
Slide copy stand. Requires ring flash for illumination and 3×–1× macro lens.
Image: Sony, used by permission
Sony AD-MSCF1
MS to CompactFlash card adapter. Allows Memory Stick Duo to be used in cameras having only a CompactFlash slot.
Image: Minolta, used by permission
Minolta SD-CF 1
SD to CompactFlash card adapter. Allows SD cards to be used in cameras having only a CompactFlash slot.